Reset Canon Pixma iP1980 or Canon iP1900 series

Although software resetter Canon Pixma iP1980 or resetter canon Pixma iP1900 series not available on the internet now. Doesn’t mean there is no way to reset the printer series. My opinion canon Pixma iP 1980 is new version of Canon Pixma iP 1880 so the reset methode for canon iP 1880 can be applied to Reset Canon iP1980. I also tested using reset methode for Canon iP1700 on it’s work on several Printer Canon iP1900 series.

For permanent reset after doing the manual reset you must using software restter. Software resetter such as iPtool and general tool for canon iP 1800 can be used to reset waste ink counter on the Canon iP1980 and Canon iP1900 series. To reset Waste Ink Tank canon iP1980 or iP1900 series follow this steps:
Press Resume button hold for 1 – 2 minutes

1. Open the cover
2. Release the catridge and then put catridge again
3. Close The Cover
4. Turn Off
5. Then Turn On again

CANON PIXMA IP1900 is just a successor of ip1880 PARTS & MANUALS ARE THE SAME but a little bit faster than 1880

1. USE GENERAL TOOL
2. CHANGE USB PORT change into CANON PORT
3. click lock release
4. click ip1800
5. click device id
6. clear waste ink counter by clicking MAIN & PLATEN
7. Check EEPROM Box
8. Click EEPROM Dump
9. Test pattern 1
10. Your Done…

but this is not the end of your problem
EVERYTIME YOU CLEAR WASTE INK COUNTER you have to open your printer
and wash the INK PAD and let it dry it will damage any part of your computer if you
will not do this.